Woodpecker Surgery X

-1000x1000.jpg)




-80x80.jpg)



Woodpecker DTE Surgery X, a piezosurgery
unit to perform precise and safe osteotomy dental surgical procedures. It is a
3rd generation equipment.
Controlling various surgery with a piezosurgery handpiece is
excellent because compared to a drill, the force needed by surgeons to impact a
cut on a hard tissue is much less. The burs operated by a micromotor require
greater force, produced by imposing increased hand pressure.
It is used for various surgical procedures such as minimally
invasive tooth extraction, direct or indirect sinus lift, alveoloplasty, retrograde
endo, apicoectomy, crown extension, alveolar ridge splitting, implant site
preparation, impaction, etc.
Key Features of Woodpecker Ultrasurgery X:
- Enhanced
precision in bone cutting with a soft tissue-sparing technique that does not
injure to the blood vessels, mucous membrane, gingiva, tongue, etc.
- Micrometric
bone cutting for reduced patient stress and post-operative trauma.
- Faster
healing because of the ultrasonic vibration that activates the
osteoblastic cells.
- Cavitation the effect that causes micro-coagulation and helps in better visibility of the operation field that enables bloodless bone surgery.
- Clear
7-inch touch screen with easy cleaning to allow ease of operation.
- LED
Handpiece with latest sealing technology for enhanced performance and easy for autoclaving that reduced the risk of cross-contamination.
- Cold
Cutting Mode to protect the tissue structures from necrosis.
- Athermic
tips that are very durable and resistant to corrosion.
- Availability
of different types of kits (Endo/Perio/Implant/Osteotomy/Extraction)
provides flexible operation to the dentist.
- Multifunctional
foot control for the dentist to allow aseptic operation.
- Availability of clean mode to flush out the liquid that enhances the life of the tubings, along with this disinfects the whole tubing.
Available Modes:
- Bone Mode: As per the bone density, the power level is adjusted in the unit to avoid any unwanted accidents during any surgical procedure.
- Class
I Bone: Level 5,6,7 (Bone with very high density)
- Class
II Bone: Level 3 & 4 (Bone with high density)
- Class
III Bone: Level 2 & 3 (Bone with uniform bone density)
- Porous bone: Level 1 & 2 (Bone with very low density)
- Perio
Mode (Bone under the level of the gum)
- Endo
Mode (Retrograde endo surgical procedures)
- Clean Mode (Step on the foot pedal for 3s during the cleaning mode to start the cleaning process. All of the tubings can be fully washed within 25 sec. The tubings should be washed after each procedure.)
Technical Specifications:
- Dimensions:
276mm x 267mm x 110mm
- Intermittent
Running Device: Intermittent Running with 10s pause after the 60s
operation
- Water
Flow: 25~ 110ml/m
- Power: 5
- 70W
- Mains
Voltage: 100-240V
- Working
Frequency: 24-36KHZ
- Weight: 2.8
kg
- Vibration the amplitude of tip: 20- 100 mm
- Surgical Incision: 3.5mm long, 0.5mm wide
Operational Instructions:
Plugin the device and wait for 2 sec for the device to be on.
Then select the mode, water & power as per the requirement. Attach the
required tip and tighten it with the torque wrench. Now the unit is ready for
use.